What are the characteristics of synchronous pulley in application?

Synchronous pulley is generally made of steel, aluminum alloy, cast iron, brass and other materials. Its inner holes are in the form of round holes, D-shaped holes, tapered holes, etc. Synchronous pulley drive is composed of a closed annular belt with equidistant teeth on the inner surface and corresponding pulley.

From the product perspective, we can see that the synchronous pulley has the advantages of accurate transmission ratio, no slip, accurate transmission and high transmission efficiency, and from the application perspective, we can see many advantages of the transmission device.

1. Small space

As the structure of synchronous pulley is relatively compact, the space required for application is very small, which can optimize the operation of equipment without affecting the degree of equipment structure optimization.

2. Low tension

When the synchronous belt pulley is used, the tension is very small, so it is not easy for the synchronous belt to jump off. The use is very safe, and there is no obvious potential safety hazard.

3. No lubrication required

When the synchronous pulley is used, it does not need to be lubricated like other transmission devices, so the maintenance is very simple and convenient.

4. No pollution

The pulley in application can show good transmission effect without any pollution.

5. Low noise

Because the synchronous pulley itself has good buffer and damping capacity, the noise generated during transmission in application is very small.